Posts: 57
Joined: Mon Apr 06, 2026
Salutations, all!
I've lately become aware of a bothersome cracking or creaking noise emanating from the area of my CX-60's Head-Up Display (HUD), particularly when navigating uneven roads.
Does anyone else have a similar story?
Posts: 57
Joined: Mon Apr 06, 2026
It really annoys me because I have it. As the temperature rises, as it is doing now in spring, it will only occur.

The windscreen alignment clips located behind the headliner are another possible culprit, so the story goes. Or close to the metal car body, by the edge of the windscreen.

The noise doesn't go away no matter how hard I press on various spots on the windscreen; thus, I am beginning to suspect the HUD. This is my 2022 PHEV...

Some think it's the HUD, but here's a clip about another Mazda model.
Posts: 57
Joined: Mon Apr 06, 2026
Is anyone aware of what caused it or how to fix it?
Posts: 57
Joined: Mon Apr 06, 2026
Posts: 16
Joined: Mon Apr 06, 2026
Also, I have it. As the weather warms up, it does in fact occur. However, I'm not too bothered by it.
Posts: 29
Joined: Mon Apr 06, 2026
The NHTSA website has the TSB for the CX-70/90.
Posts: 29
Joined: Mon Apr 06, 2026
Posts: 38
Joined: Mon Apr 06, 2026
Thank you, that is really useful!

I intend to bring it to my dealer after printing it out. When people have never heard of this problem before, I can use it.
Posts: 57
Joined: Mon Apr 06, 2026
Much obliged. I'll see if I can do it on my own!
Posts: 38
Joined: Mon Apr 06, 2026
I recently viewed and listened to the video up there. That would also irritate me greatly. The one in my car is considerably quieter.
Post Reply